G4 Owner’s Manual – 23 – Swoop & Sit Fly Belly Band Installation

For installation of optional swoop (large) & sit fly (small) belly bands on Mirage harnesses having hip rings.

1.  Position adjuster end of belly band at left hip ring with the shorter loop on the inside of harness.

2.  Fold long end through hip ring.

3.  With red slink tab facing the leg straps, pass loop end of slink up through one webbing loop, and back down through the other.

Safety Note – The slink must pass through both webbing loops twice.

4.  Pass loop end of the slink back through the first webbing loop.

5.  Pass the loop end of the slink back down through second webbing loop.

Pull slink tight.

6.  Pass loop end of slink through opening under red tab.

7.  Pass red tab through loop end of slink.

Pull tight.

8.  Repeat procedure for right hip ring.

9.  Properly installed, the adjuster will be on the wearer’s left and slinks will be to inside of harness.