G4 Owner’s Manual – 24 – Installing Main Risers With Large Swoop Loops

Mirage main risers with large swoop loops are designed with Spectra line at the top of the front risers handle.
This allows the handle to lay flat when packed into the rig.

1.Make sure that the four line groups are routed to their correct riser.

2. Pass slink through riser and line group a second time.
Make sure the slink passes around the Spectra line of the swoop loop.

3. Pass loop end through under tab.

4. Feed tab back through loop and pull tight.

5. Tuck tab away.

Perform a thorough suspension line continuity check.