G4 Owner’s Manual – 8 – Authorized Components

September 22, 20170

The Mirage harness and container system was tested in accordance with TSO C-23b and National Aircraft Standard (NAS)-804 as a complete assembly.  Installation or substitution of components not authorized by Mirage Systems, Inc. is prohibited.

Do not install a reserve parachute of lesser or greater pack volume than the intended design criteria of the Mirage reserve container being packed.

“Round” reserve parachute canopies are not authorized.


The following components are authorized for installation:

  • Ram-air reserve parachute canopies manufactured under TSO C-23b, TSO C-23c, TSO C-23d, and TSO C-23f.  See “Reserve Parachute Compatibility” in “Operating Limits”.
  • An Automatic Activation Device (AAD) evaluated by Mirage Systems and listed on the Mirage “Authorized AAD List”.


The substitution of any of the following components with a component not manufactured by Mirage Systems, Inc. is NOT AUTHORIZED:

  • Reserve parachute deployment bag and bridle
  • Reserve pilot chute
  • Reserve ripcord
  • Reserve static line (RSL)
  • Trap System™️ components (RSL, Trap Line, Main Risers)