WELCOME  TO  MIRAGE  SYSTEMS  !

Call us!  We are happy to answer your questions.

We regularly update our stock rigs in all sizes …   

Check daily for new additions  👀

Current delivery times are listed on the home page …

* These delivery times require a completed order form and order confirmation.

 
Customer Support & Sales
386-740-9222
sales@miragesys.com
Office Hours
Mon-Fri: 8am - 5pm EST
Chat via messenger

G4.1 M4

Note:  This was our previously standard M4 – it has not changed.  G4.1’s are being moved over to the short series as the curved shape of the G4.1 makes it a slightly shorter rig than the straighter, less curved G4.2.  Rig lengths can be found on our canopy compatibility chart.  We will, of course, continue to offer and support the G4.1 so you can choose the style of rig that you prefer.

This size is best for jumpers 5’5″ (165cm) or shorter.
Our new G4.2 M4M and M4L have replaced this size.

  • Filter by Model

  • Filter by Stab (waist) / Yoke (chest)

  • Filter by Accent Color

  •  

    Mirage Harness Sizing

    The Mirage harness has four (4) parts.

    1. MLW : The main lift web is the front of the harness and is determined by the length of your torso.
    2. LP : The leg pads.
    3. STAB : The stabilizers (waist) determine how snug the bottom of the rig is against your back.
    4. YOKE : This is over the shoulders.  If you have a large chest or thick shoulders (lift weights) you may need a longer yoke.

    Our stock rigs already have a stabilizer and yoke size.

    Instructions:  

    A

    Determine Your Stabilizer (waist) :

    Measure around your waist at the belly button

    ●  The stabilizers determine how tight the rig is against your lower back.

    ●  Stabilizers are sized in 1/2 inch (1.27 cm) increments

    ●  + or – 1/2 inch from your size is usually acceptable.  Each increment is similar to loosening or tightening your belt one notch.

    ●  More than 1/2 inch from your correct size is not desirable.  The rig will be too tight or too loose against your back.

    Reference Tool : Stabilizer Measurement

    B

    Determine Your Yoke (chest/shoulders) :

    Measure around your chest across the nipples

    ●  If a yoke size isn’t indicated then the rig has a standard yoke

    ●  +1 or -1 yoke means that the distance from the top of the rig to the 3 rings (over the shoulder) was adjusted by 1 inch.

    ●  A standard yoke is usually acceptable for a person that needs a -1 yoke.

    ●  A standard yoke will feel snug or tight in the shoulders for a person that needs a +1 yoke

    ●  If you have thick shoulders (lift weights) you may want us to double check your sizing.

    Reference Tool : Yoke Measurement

    C

    Filter For Your Stabilizer & Yoke Size To See The Stock Rigs That Can Fit You !

    Remember that you can usually go up or down one stabilizer size if desired